Publicité
Les langues disponibles
Les langues disponibles
The upper Screen has to be
placed carefully into the inten-
ted notch. Non-observance
may result in plant particles in
the Valve Balloon that might be inhaled
subsequently.
9.4.6. Assembly of the Filling
Chamber
Push the Filling Chamber Cylinder
from above into the Filling Chamber
Housing and allow it to lock in place.
Insert the Screen or the Filling Pad into
the Filling Chamber from above. Screw
the Filling Chamber Cap onto the Fil-
ling Chamber in a clockwise direction.
9.5. Disassembly and Assembly of
the Tube Kit
9.5.1. Disassembly
Allow the Tube Kit to cool down before
disassembling it.
The Tube Flexer and Mouthpiece must
be cleaned at the intervals prescribed
in Chapter 9.3. "Filling Chamber as well
as Tube Flexer and Mouthpiece of the
Tube Kit", page 116. Disconnect the
Tube Flexer and Mouthpiece from the
Tube.
9. C L E A N I N G / H Y G I E N E
122
Disconnecting the Tube Flexer and
Mouthpiece from the Tube
9.5.2. Drying
The Tube Flexer and Mouthpiece must
be thoroughly dry before assembling
them.
Place these two parts on a dry, clean
and absorbent pad and allow them to
dry thoroughly. A hair dryer may be
used for faster drying. Do noy dry in
wet rooms (e.g. not in the bathroom).
9.5.3. Assembly
First, insert the Tube into the Tube
Flexer and then insert the Mouthpiece
into the Tube.
Publicité
