Publicité
Les langues disponibles
Les langues disponibles
7. T H E U S E O F H E M P F L O W E R S
7.4. Application Part: Tube Kit
When observing the Instructions for Use and with a vaporization temperature of
210°C (410°F) the following reference values are validated in studies:
Drug (Filling
Chamber Con-
tent)
drug A (100 mg)
drug B (100 mg)
In order to reach these values, inhalation must be continued until there is no ae-
rosol (vapor) recognizable when exhaling. The Filling Chamber's content is then
depleted.
7.4.1. Application
Before using the Tube, switch
off the pump by pressing the
touch button labeled ‚AIR'.
Place the Filling Chamber with cap on
the Hot Air Generator and screw it on
clockwise as far as it will go. Switch on
the heater (HEAT), adjust the set tem-
perature and let it heat up. When the
actual temperature corresponds to the
set temperature, place the Tube Kit on
the Filling Chamber and let it lock in
place.
Cannabinoid
content in drug
THC: approx.
19 mg
THC: approx.
6 mg
CBD: approx.
7,5 mg
Cannabinoid
content in Valve
Balloon after vapo-
rization with 210°C
(410°F)
approx. 12 mg
approx. 4 mg
approx. 5 mg
7.4.2. Inhalation
Tube with attached Mouthpiece
Slowly inhale the vapor from the Tube
with the Mouthpiece attached for a
few seconds.
108
Cannabinoid
content in blood
stream (systemic
bioavailability)
after inhalation
approx. 8,25 g
approx. 2,75 mg
approx. 3,4 mg
Publicité
