Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-198-005.book Page 47 Tuesday, August 31, 2010 10:36 AM
Transport (see figure V)
Before transporting the power tool, the follow-
ing steps must be carried out:
– Loosen the locking screw 25 if tightened.
Pull the tool arm completely to the front and
tighten the locking screw again.
– Screw the depth stop 23 all the way up or
turn the depth stop lever 47 in clockwise di-
rection back to the stop.
– Bring the machine into the transport posi-
tion.
– Remove all accessories that cannot be
mounted firmly to the power tool.
If possible, place unused saw blades in an
enclosed container for transport.
– Carry the machine by the transport handle 2
or hold it by the recessed grips 59 on the
sides of the saw table.
The power tool should always be carried by
two persons in order to avoid back injuries.
When transporting the power tool, use only
the transport devices and never use the
protective devices.
Bosch Power Tools
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Cleaning
For safe and proper working, always keep the
power tool and its ventilation slots clean.
The retracting blade guard must always be able
to move freely and retract automatically. There-
fore, always keep the area around the retracting
blade guard clean.
Remove dust and chips after each working pro-
cedure by blowing out with compressed air or
with a brush.
Clean the roller 7 and the lighting and laser unit
(45, 46) regularly.
Accessories
Dust bag. . . . . . . . . . . . . . . . . . . 2 605 411 222
Material clamp . . . . . . . . . . . . . . 2 608 040 205
Extension bars . . . . . . . . . . . . . . 2 607 001 978
Insert plates . . . . . . . . . . . . . . . . 2 607 001 966
Saw blades for wood and plate materials, pan-
els and strips/mouldings
Saw blade 216 x 30 mm,
48 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 641
1 609 929 X05 | (31.8.10)
English | 47
Publicité
