Bosch GCM 8 S Professional Notice Originale page 34

OBJ_BUCH-198-005.book Page 34 Tuesday, August 31, 2010 10:36 AM
34 | English
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
Symbols
The following symbols can be important for the operation of your power tool. Please memorise the
symbols and their meanings. The correct interpretation of the symbols helps you operate the power
tool better and more secure.
Symbol
1 609 929 X05 | (31.8.10)
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Meaning
Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself, not even from a dis-
tance. This power tool produces laser class 2 laser radiation
according to EN 60825-1. This can lead to persons being
blinded.
Wear safety goggles.
Wear ear protectors. Exposure to noise can cause hearing
loss.
Wear a dust respirator.
Keep hands away from the cutting area while the machine
is running. Danger of injury when coming in contact with the
saw blade.
Danger area! Keep hands, fingers or arms away from this
area.
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reducers
or adapters.
Bosch Power Tools