Assembly Instructions - Health O Meter PROPLUS 2000KL Mode D'emploi

ASSEMBLY INSTRUCTIONS

Before Assembly
The Model 2000KL ProPlus® Stretcher Scale is shipped disassembled in three (3) separate cartons.
Carefully inspect all cartons for shipping damage before unpacking. If damage is found, contact your
shipper or Health o meter® Professional representative immediately. Claims must be filed with the
shipper as soon as possible after receipt of the damaged package.
Remove each assembly from the carton and unwrap packing material carefully to prevent scratching
the unit's parts. It is recommended that two people perform the assembly. To avoid damaging the
scale parts when unpacking it, do not use a box cutter, knife, scissors or any sharp object to
open the packaging.
The scale is shipped in three (3) separate cartons as follows:
A. Large carton containing:
(1) Hydraulic pump assembly
(1) Lifter mast
(1) Base adjustment lever
(1) Lifter base with casters
B. Small carton containing:
(1) Lifter boom
(1) Scale Display support
(1) Display assembly
(1) Load cell assembly
(2) Stretcher hoops
(1) Stretcher canvas
C. Long, narrow carton containing:
(2) Stretcher bars
Tools required: Phillips screwdriver, adjustable wrenches, 7/16" Allen wrench.
Parts of Stretcher Scale:
Display
Lifter mast
Hydraulic pump assembly
Base adjustment lever
(1) Stretcher storage tray
(1) AC Adapter holder
(1) AC Adapter
(1) Display rear cover
(6) Screws for display
(2) Shoulder screws / washers
Figure 1
- 6 -
(1) Stretcher retaining strap
(1) Hexagon screw w/ lock nut
Lifter boom
Stretcher hoop
Hanging loops
Stretcher canvas
Lifter base with casters