Selecting A Sound Field - Sony HT-K215 Mode D'emploi

SURR
LEVEL
VIDEO TV DVD
?/1
SURR LEVEL SET UP
– +
+/– buttons
Brief descriptions of buttons used to
enjoy surround sound
LEVEL button: Press to customize the level parameters.
SURR button: Press to customize the surround
parameters in the current sound field.
+/– buttons: Use to adjust parameters and select sound
fields (etc.).
SOUND FIELD MODE button: Press to activate the sound
field selection mode.
24 GB
MASTER VOLUME
R
AUX 5.1CH/SAT
– +
SOUND FIELD MODE
SOUND FIELD MODE

Selecting a Sound Field

You can enjoy surround sound simply by selecting one of
the pre-programed sound fields according to the program
you want to listen to.
1
Press SOUND FIELD MODE.
The current sound field is indicated in the display.
2
Press SOUND FIELD MODE repeatedly to select the
sound field you want.
See the table starting on page 25 for information on
each sound field.
To turn the sound field off
Press SOUND FIELD MODE repeatedly to select A.F.D or
2 CH.
z
The amplifier memorizes the last sound field selected for
each program source (Sound Field Link)
Whenever you select a program source, the sound field that was
last applied is automatically applied again. For example, if you
listen to CD with HALL as the sound field, change to a different
program source, then return to CD, HALL will be applied again.
z
You can identify Dolby Surround-encoded software by
looking at the packaging
Dolby Digital discs are labeled with the
Surround encoded programs are labeled with the A
logo.
logo, and Dolby