Sony HT-K215 Mode D'emploi page 22

Front Panel Parts Descriptions
1
?/1
SURR LEVEL
–
4 5 7
3 MASTER VOLUME control
After turning on the component you selected, rotate to
adjust the volume.
4 SURR button
Press repeatedly to activate the surround parameters
(page 29) and to adjust the various surround
parameters (effect level, wall type, etc.). You can then
make various settings using the +/– buttons (7).
5 LEVEL button
Press repeatedly to activate the speaker level
parameters (page 30) and to adjust the various speaker
level parameters (front balance, rear balance, etc.). You
can then make various settings using the +/– buttons
(7).
6 SET UP button
Press repeatedly to activate the setup mode and to
select any of the following indications. You can then
make various settings using the +/– buttons (7).
When you select
Speaker type
Speaker setup
Speaker Distance
22 GB
VIDEO TV
SET UP
+
6
You can
Specify the type of speakers.
(page 15)
Specify the front, center, rear
speaker sizes, the rear speaker
position, and whether or not you
are using a sub woofer. (page 15)
Specify the front, center, and rear
speaker distances. (page 17)
2
DVD AUX 5.1CH/SAT
7 +/– buttons
Press to adjust the selected speaker level and surround
parameters (etc.).
8 SOUND FIELD MODE
Press repeatedly to activate the sound field selection
mode and to select the sound field you want (page 24).
3
MASTER VOLUME
R
+
SOUND FIELD MODE
8