Using The Sleep Timer - Sony HT-K215 Mode D'emploi

Using the Sleep Timer

You can set the amplifier to turn off automatically at a
specified time.
Press SLEEP on the remote while the power is on.
Each time you press SLEEP, the time changes as shown
below.
n 2:00:00 n 1:30:00n 1:00:00 n 0:30:00 n OFF
The display dims after you have specified the time.
z
You can freely specify the time
First, press SLEEP on the remote, then specify the time you want
using the +/– buttons. The sleep time changes in 1 minute
intervals. You can specify up to 5 hours.
z
You can check the time remaining before the amplifier turns
off
Press SLEEP on the remote. The remaining time appears in the
display.
33 GB