Understanding The Multi-Channel Surround Displays - Sony HT-K215 Mode D'emploi

Understanding the Multi-Channel Surround Displays

L
LFE
LS S RS
6
1 ; DIGITAL
This indicator lights up when a sound field other than
2 CHANNEL is selected and the unit is decoding
signals recorded in the Dolby Digital (AC-3) format.*
* However, this indicator does not light when the recording format
is 2/0 or 2/0 Pro logic.
2 PRO LOGIC
Lights up when the amplifier applies Pro Logic
processing to two channel signals in order to output
the center and surround channel signals.**
** However, this indicator does not light if the center and rear
speakers are set to "NO", and the A.F.D. or NORMAL
SURROUND sound fields are selected.
3 OPT
Lights up when the source signal is a digital signal
being input through the OPT terminal.
4 ;
Lights up when Dolby Digital (AC-3) signals are input
through the OPT terminal.
5 dts
Lights up when DTS signals are input through the
OPT terminal.
6 Playback channel indicators
The letters light up to indicate the channels being
played back.
L: Front Left
C: Center (monaural)
RS: Right Surround
S: Surround (monaural or the rear components
obtained by Pro Logic processing)
The boxes around the letters light up to indicate the
speakers used to playback the channels.
See the next page for details regarding the playback
channel indicators.
1
DIGITAL PRO LOGIC OPT
C R
7
R: Front Right
LS: Left Surround
2 3 4 5
dts
7 L F E
will light up when the disc being played
L F E
contains the LFE (Low Frequency Effect) channel and
when the sound of the LFE channel signal is actually
being reproduced.
27 GB