EUROM 363463 Manuel D'utilisation page 37

selected and pressing - next to the days that you don't want to select. Use to
arrows to move to the next day. Press again on the PROG SET button to choose the
days and confirm.

The hours indication will now flash and you will see ON on the display. By selecting
the + and - buttons, you choose the hours when you want the stove to operate.
Confirm by pressing the PROG SET button.

The minutes indicator will now flash. By pressing the + and - buttons, you select
the time period (in intervals of 10 minutes) for the stove to operate. Confirm by
pressing on the PROG SET button. The starting time is now set.

The hour indicator is flashing again to order for you to set at which time the
operation must end. OFF appears on the display. Select the time in the same way
you selected the operating time and confirm by using the PROG SET button.

Now the temperature setting starts to flash. Using the + or - buttons, select the
desired temperature and confirm by using the PROG SET button.

You initial timer setting is now set.

To generate a second setting, press once again on the PROG SET button. While P1
is flashing, press on the + button: P2 will appear. Confirm this using the PROG SET
button and subsequently set new days, hours and minutes as described above.

You can generate maximum 9 time settings. Prevent the setting from containing
any conflicting or overlapping orders.
 To operate the stove according to the timer settings, do the following:

Switch on the stove using the ON/OFF button.

Press the 1000W or 2000W button to set the desired output. If the desired
temperature is above the ambient temperature, the stove will begin to heat
(1000W, 2000W). The corresponding light will light up on the display (1000W-1
star, 2000W-2 stars).

Now activate the timer operation by pressing the TIMER ON / OFF button. The
'timer in operation' lamp lights up. If you now press OK, the fire will complete all
settings on a weekly basis.

Attention! All timer settings (maximum 10 per week) will be processed completely
one by one. Therefore, make sure that they do not contradict each other!

If you wish, you can also readjust the thermostat, output and dimmer while the
timer is working.

You stop the operation of the timer by pressing on the TIMER ON/OFF button. The
stove will act as if there are no current timer settings and will simply operate
according to the thermostat and output settings. By pressing the TIMER ON/OFF
button again, you reactivate the timer setting.

To erase the timer setting, press on the PROG SET button. P1 will start flashing on
the display. Using the + and - buttons, look for the setting number that you want to
erase and subsequently press on the C button (erasing the timer setting). The
timer setting will disappear immediately.
37