Publicité
Les langues disponibles
Les langues disponibles
Display
a. ON/OFF button
b. Button for setting the time
c. – button
d. Erasing the time setting
e. Timer on/off button
f. Dimmer button
g. DATE and TIME button
h. + button
i. Open-window-detection
j. 1000W button
k. 2000W button
Location and connection
Remove the packaging materials and keep out of the reach of children. After removing
packaging, check device for damage or any evidence that may point to a defect/failure.
If in doubt, do not use the device but refer to your supplier for checks/repairs.
The fireplace must be placed against a wall. Place the heater on a sturdy, flat surface.
The substrate must be heat-resistant. Make sure that the suction openings are never
blocked!
Choose a suitable location for the fireplace, at least one metre from all obstructions,
walls and flammable materials (see safety instructions) and in the vicinity of a 16 Amp
(at least) fused, earthed electrical socket (protected by a 30 mA earth leakage circuit
breaker).
Remote control:
1. Stand-by light
2. Day indicator
3. Temperature and thermostat setting
4. Time indicator and timer setting
5. Lamps of 1000W-2000W-Open Window-
detection
6. Dimmer setting Operating timer light
7. Operating timer light
8. Timer ON & OFF setting
34
Publicité
