You switch off the stove by pressing the ON/OFF button. The temperature level that
you set will remain. However, if you switch on the stove once again, you will have to
reset the output.
If you want to switch off the stove for a longer period, then also set the main switch on
O (OFF). The set temperature will now be erased. Finally remove the plug from the
socket.
If you do not enter any orders for approx. 15 seconds, the display will turn off. Pressing
any random button will reactivate the display.
Set open window detector:
Make sure the unit is switched on and heating up.
Press
; the display shows the corresponding icon
You can change this using the plus and minus buttons. When open window detection
is switched on, the unit will switch off if the temperature in the room drops quickly
and go to standby. In this case, you can turn the unit on again using the on/off button.
Press the
disappears from the display and the unit returns to its previous settings.
If the heater is set to come on in a weekly programme and you turn the open window
detection on, this will only work while the unit is switched on in the weekly
programme.
Timer
The stove has a built-in weekly timer, which allows you to set a weekly schedule for
switching on and off. You must first set the date and time; if you don't do that, then the
stove assumes that it is scheduled for Sunday at 00.00!
Press the ON/OFF button to switch on the stove.
Press on the DATE/TIME button; the day indicator will light up. Select the arrows Λ
and V for the current day and confirm this by pressing the DATE/TIME button again
(Sunday, Monday, etc.)
The hour indication will now flash. By pressing on the + and - buttons, you select
the current hour. Reconfirm by pressing on the DATE/TIME button.
The minutes indicator will now flash. By pressing on the + and - buttons, you select
the precise time. Confirm by pressing on the DATE/TIME button.
Day and time are now set.
To set the weekly timer, take the following steps:
Ensure that the stove is switched on with the ON/OFF button.
Press on the PROG SET button. The indication P1 on the display starts to flash,
indicating that you have selected the first timer setting (you can select 9 timer
settings). Confirm this by pressing once again on the PROG SET button.
The day indicator will now flash (SUN). Choose the days when the stove must
operate (e.g., from Monday to Friday) by pressing + next to the days you have
button again to turn the open window detection off. The icon
36
and the temperature (°C).