Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Chain saw
Art. No
Contents
Max. Power 2-stroke motor
Idle speed
Chain speed
tank capacity
Oil mixing ratio for 2-stroke motors: fuel
Chain oil tank
Saw bar Type
Cutting length*
Bar length
Saw chain Type
Segment / Guiding footing thickness
Number of guiding footings
Weight (net) without bar, chain and empty tank
Noise details
Sound pressure level L
1)
pA
Measured sound power level L
Guaranteed sound power level L
Wear ear protectors!
Vibration details
Vibration emission value a
* without claw
At work place, Measured according to ISO 22868, Uncertainty K=3 dB (A),
1)
Measured according to 2000/14/EC, 2005/88/EC
2)
Measured according to EN ISO 22867, Uncertainty K=1,5 m/s
3)
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
1)
WA
2)
WA
3)
h
KS 400-A
94892
46 cm
2,0 kW (2,72 PS)
3300 min
21 m/s
0,55 l
1:40
0,26 l
Oregon
ca. 400 mm
460 mm
Oregon
3/8" / 1,3 mm
57
4,7 kg
99 dB (A)
110 dB (A)
114 dB (A)
7,5 m/s
2
ENGLISH
39
3
-1
2
Publicité
