Electrical Supply - Sinmag Europe SM-25 Mode D'emploi

ENG

2. Electrical supply

Please connect the machine to the correct electrical
supply, as indicated on the identification plate.
After the machine has been connected to the elec-
trical supply, first of all check the direction of rotati-
on of the kneading spiral and the bowl. Seen from
above, both kneading spiral and bowl should rotate
clockwise. The arrow on the bowl indicates the
rotating direction of the bowl.
If the rotating direction is wrong, please exchange
any two of the electrical phase cables to reverse the
rotating direction.
SINMAG EUROPE BVBA
4