Sinmag Europe SM-25 Mode D'emploi page 6

ENG
4. Operation of the spiral mixer by means of the
touch digital panel
4.1
Description
4.1.1
Timers
The timers are located at the upper side of the panel. Timer I is for
first speed, timer II for second speed. Both timers indicate the time in
minutes.
The timers are set by means of the
+ once, the set time will increase by 10 seconds. The maximum time
that can be set is 20 minutes. After 20 minutes, the timer will start from
0 minutes again.
Press the
Safety cover open
During MANUAL operation, the timer will not work.
When the
6
- key for diminishing the set time by 10 seconds.
When the spiral mixer is switched
timers will indicate the set time. When the
timer starts to work, the time indicated on the
timer will be reduced 10 seconds at a time
until it reaches 0.
When the safety cover is raised during AU-
TOMATIC operation, the timer will stop at the
current position. When the spiral mixer restarts
after such a stop, the timer will continue from
the current postition to finish the remaining
time.
OFF -key is pressed, the timers will return to the set time.
+ and - -keys. If you press the
SINMAG EUROPE BVBA
ON , the