Indication Leds - Sinmag Europe SM-25 Mode D'emploi

4.1.2

Indication LEDS

These LEDS show the operation mode in which the spiral mixer is
functioning:
"AUTO/MANUAL" operation:
A.
When the "AUTO"LED lights up, the spiral mixer is functioning in
AUTOMATIC mode.
When the "MANU" LED lights up, the spiral mixer is functioning in
MANUAL mode.
Bowl direction:
B.
When the -LED lights up, the bowl will rotate in FORWARD directi-
on (clockwise).
When the -LED lights up, the bowl will rotate in REVERSE directi-
on. (counterclockwise)
The ON -LED lights up when the machine is operating.
C.
Speed:
D.
When the "I"-speed lights up, the spiral mixer is operating in first
speed.
When the "II"-LED lights up, the spiral mixer is operating in second
speed.
The "INCH"-LED indicates the inching mode. When neither the
E.
INCH , nor the
The STOP -LED lights up only when the safety cover is raised during
F.
operation of the machine.
"O.L." (Over-Load): This LED lights up when the overload relay is
G.
on. After the fault (voltage drop, mixer overload or one of the cable
connections has come loose) has been removed, this LED will turn
off.
ON -LED lights up, the machine is in
SINMAG EUROPE BVBA
ENG
STOP .
7