Electric Supply; Water Supply; Power Button - Sinmag Europe SM705E Mode D'emploi

ENG

2. ELECTRIC SUPPLY

Connect the correct electric supply to the oven as indicated on the nameplate.
The electric supply should be connected to the oven by a professional elec-
trician. The connection of the wires should be tied firmly. The oven should be
in grounding protection. (L1: red or brown, L2: green, L3: White, N: blue, E:
yellow and green)
After the oven has been connected to the electric supply, first of all check the
direction of rotation of the fan. It should rotate clockwise when looking from the
front of the oven. If the rotating direction is adverse, please exchange any two
of the electric cables to reverse the direction.

3. WATER SUPPLY

Please choose a ø 12 X 1mm hose to connect the water inlet and the water
supply. Incoming water pressure should be 1 - 7 kg/cm
4. DESCRIPTION OF THE OPERATION PANEL

4.1. Power button

Power indication lamp
Power button
• Before work, press power button, power indication lamp is on.
• After work, press power button again, power indication lamp is off.
4.2. Lighting button
• Press the button "LIGHT", turn on lighting indication lamp.
• Press the button "LIGHT" again, turn off lighting indication lamp.
4.3. Thermostat
4.3.1. Set baking temperature
Set temperature
Baking
temperature
4
UP
DOWN
Temperature indication lamp
SINMAG EUROPE BVBA
2.
Lighting indication lamp
Lighting button
Actual temperature
On/Off thermostat