REX CX-200 Mode D'emploi page 30

Assembly
STEP 7
STEP 8
GB-30
REX_Trainer_CX200_12.indd GB-30 REX_Trainer_CX200_12.indd GB-30
All manuals and user guides at all-guides.com
WARNING
1. Now attach the covers for the frame tube (80 and
WARNING
1. Mount the handgrip (13) to the frame tube. You will
2. Connect the computer (1) to the upper computer
3. Fasten the computer with two M5 screws (99).
4. Now connect the pulse connector (10) to the rear
81). Use four M4 screws (70) and one M8 screw (102)
respectively.
need two M8 screws each with an M8 spring washer
(66).
cable (2).
side of the „Pulse Input" computer.
Assembly
02.05.12 08:13 02.05.12 08:13