REX CX-200 Mode D'emploi page 27

Assembly
Assembly
STEP 1
STEP 2
REX_Trainer_CX200_12.indd GB-27 REX_Trainer_CX200_12.indd GB-27
All manuals and user guides at all-guides.com
WARNING
1. Place the front foot (22) and the rear foot (25) on
2. Mount both feet to the main frame (20). Use the
WARNING
1. Connect the upper computer cable (19 and 50) to the
2. Push the frame tube (5) with covering (95) onto the
3. Now fasten the frame tube with four M8 screws (7)
the fl oor as illustrated.
respectively four M8 screws (21), four nuts (26) with
respectively one washer (14) and one spring washer
(66).
computer cable of the main frame (97 and 54) as well
as both traction cables (50 and 54).
frame. Make sure not to pinch the computer cable.
and four washers (6).
GB-27
02.05.12 08:13 02.05.12 08:13