REX CX-200 Mode D'emploi page 28

Assembly
STEP 3
STEP 4
GB-28
REX_Trainer_CX200_12.indd GB-28 REX_Trainer_CX200_12.indd GB-28
All manuals and user guides at all-guides.com
WARNING
1. Fasten the tread (88) on the left or right square fra-
WARNING
1. Push the axle (18) through the guide into the frame
2. Guide both moveable frame tubes (82L and 82R) over
3. Mount the square frame tubes (89L and 89R) to the
me tube (89). Three specifi ed assembly positions let
you make individual adjustments to your body
height. Use the two M6 screws (87) each with a
washer (33) and the locking grip (100).
tube (5).
the axle and fasten each of them with a screw (78),
a spring washer (77), a washer (67) and (98) and a
spacer disc (79).
main frame at the rear (20). In each case, use a
washer (94 and 101), a spacer disc (79), a spring clip
(66) and an M8 screw (83).
Assembly
02.05.12 08:13 02.05.12 08:13