ISE SY-1750 Manuel D'utilisation page 17

1. Preparatory work:
A. Make sure there is enough space before installation;
B. Use the provided tools or the special self-contained tools to install;
C. Confirm all of the components are all-ready before installation.(refer to previous
producl exploded view which indicates the name and the location of the components)
2. Assembly instructions:
Attention: Make sure all screws and nuts are tightened before Exercise
Step 1 :
Secure Slid Track Welding(3)on Main Frame(1)
with Screw(34),Washer(5) and Washer(14).
ASSEMBLY INSTRUCTIONS
5
EN