Harvia Sentiotec Pro D2W Mode D'emploi page 21

Installation instructions, for professionals only
1. Cut out the 70 x 65 or 60 x 48 mm recess using a jigsaw, for example (see
Fig. 5 and Fig. 6).
2. Provide cable guides for the connecting cables.
3. Screw the housing to the cabin wall through the hole with the 4 or 2 wood
screws enclosed.
Fig. 5
Fig. 6
Installing the Pro D control panel
Installing the control panel additional output (optional)
p. 21/70
EN