Publicité
Les langues disponibles
Les langues disponibles
Machine description (Fig. 1)
1.
ZAP/VYP switch
2.
Pressure control valve knob
3.
Pneumatic connector
4.
Pressure control valve air gauge
5.
Air jet air gauge
6.
Handle
7.
Leg
8.
Travelling wheel
9.
Bleeder
10.
Safety valve
11.
Throat for oil adding
12.
Air Filter
13.
Oil drain screw
14.
Overload protection
15.
Air dusting gun
16.
Inflating gun
17.
Inflating kit
18.
Spiral tube
Delivery
Operating Instructions
Warranty card
COMPRESSOR SET 210/08/24 12-TLG
Oil gauge or oil plug
Wheels with bolts
Wheels with screws
Rubber damper with screws
Air filter
Guarantee
The guarantee solely covers inadequacies caused by
material defect or manufacturing defect.
Original payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such
as appliance overloading, use of violence, damage as a
result of any unauthorised interference or caused by
foreign items. Failing to follow the operating and
assembly instructions and common wear are also not
included in the guarantee.
General Safety Instructions
It is necessary to read these operating instructions before
first use of the machine. If there are any doubts as far as
machine connection and handling are connected please
contact the manufacturer (servicing department).
IN ORDER TO ENSURE HIGH SAFETY LEVEL
PLEASE FOLLOW THESE INSTRUCTIONS
CAREFULLY:
Attention: Operate with current protector only!
ATTENTION!
Keep your workplace clean and tidy. Disorder at
the workplace and on the work-table increases risk
of accident and injury.
Pay attention to conditions of environment you
are working in. Do not use electric tools and
devices in a humid or wet environment. Ensure
sufficient lighting. Do not expose electric tools to rain
or high air humidity. Do not switch the electric tools
on in environments with flammable liquids or
inflammable gases.
Do not allow unauthorised persons to get to the
machine. Keep visitors and spectators, especially children
and handicapped persons, in a safety distance from your
workplace.
Ensure safe storage of tools. Tools and equipment you do
not need must be stored at an elevated place, if possible, so
that they were not accessible to unauthorised persons.
Always use correct equipment for all works.
Do not use e.g. small tools or accessories for works that
need to be executed by heavy equipment. Use tools solely
for purposes for which they have been designed. Do not
overburden the device!
Pay attention to the electric cable.
Do not pull the cable. Pull the connector plug only when
pulling out of socket. Protect the cable against heat sources,
oil and sharp edges.
Prevent from unintentional switching on.
Make always sure the switch on the device was in the off
position before connector plug is plugged in.
Use special extension cables at outdoor works.
For outdoor works you need special extension cables
suitable for such works and with appropriate marking.
Stay concentrated at all times. Pay attention to what you
are doing.
Use common sense. Do not use the electric equipment when
you are tired.
Pay attention to damaged parts. Check the device before
use. Are any parts damaged? In case of small damage
please consider whether the device is really capable of
perfect and safe working.
Protect yourself against electric shocks.
Prevent any contact of your body with earthed objects, e.g.
water piping, heating elements, cookers and fridges.
Use approved parts only. Always use only identical spare
parts at maintenance and repairs. Spare parts are available
in an authorised service centre.
Warning!
Any use of accessories and extensions not explicitly
recommended in these operating instructions may result in a
threat to persons and objects.
Safety Instructions for First Putting the Machine into
Operation
The appliance meets EN 61000-3-11 requirements and is subject
to special connection conditions. That means that use on
optionally selected connection points is inadmissible.
The appliance can lead to occasional voltage fluctuations under
unfavourable power conditions.
The appliance is only designated to be used for connection points
not exceeding the maximum allowed impedance of Zmax = 0,233
Ω. As a user, you must make sure your connection point on which
you want to use the appliance meets the above-mentioned
requirements – after agreement with your electricity supplier if
necessary.
Always pull the connector plug out of socket before machine
adjustment or maintenance.
Children are prohibited to operate the machine.
After packing removal check whether the device and all its
parts are in a perfect condition.
Always wear protective glasses and hearing protection
aids
Always wear protective glasses and corresponding sight and
hearing protection aids. Never aim with compressed air
beam at your body or other persons or animals. Impurity
12
Publicité
