Alliance Laundry Systems SC65 Instructions Importantes page 5

6. Fasten the relay board.
7. Connect the cables from the relay board to the inlet valves;
follow color-codes on the cables.
8. Secure the cables between the control unit and the relay board
with the front cable holder at the detergent dispenser.
9. Remove knock-out holes (or drill them) in the back to install
the grommets and the cables.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Figure 10
Figure 11
Figure 12
Figure 13
Finalized installation of relay board:
Delivery schedule:
• The knock-out holes were implemented in production during
2011, Q3.
5
Figure 14
Figure 15
Figure 16
Form No. 6-15-274ENR1