Lubrication - Honda UMR435T Manuel De L'utilisateur

7. While aligning the inner shaft with
the mating part and unlocking the
lock lever, insert the flexible shaft
assembly into the engine side clutch
case. Insert the flexible shaft
assembly until the lock lever clicks.
• After lubricating and/or inspecting
the flexible shaft, start the engine
(see page 34) and check that the
cutting blade or nylon-line cutting
head turns with no problem.
If there is any abnormality, consult
with your authorized Honda dealer.

Lubrication:

1. Set the flexible shaft assembly
straight, unlock the clutch case lock
lever and remove the flexible shaft
assembly from the engine side.
2. Remove the inner shaft from the
flexible shaft assembly.
INNER SHAFT
(Insert the inner shaft
while turning it.)
FLEXIBLE SHAFT
ASSEMBLY
LOCK LEVER
CLUTCH CASE
FLEXIBLE SHAFT
ASSEMBLY
LOCK LEVER
INNER SHAFT
CLUTCH CASE
FLEXIBLE SHAFT
ASSEMBLY
59