Honda UMR435T Manuel De L'utilisateur page 32

5. Operate the throttle system several times and check it has the free play (i.e.
throttle lever does not move while operating the throttle trigger).
• Holding the flexible shaft and gear case between the clutch case and cutting
head in line with each other, check the throttle trigger for function (see page
21).
• Return the flexible shaft in the position of the step 3, and check there is the free
play.
• Check the throttle trigger operates smoothly and always spring back to the idle
position.
If there is any abnormality, the throttle system must be serviced. Consult with your
authorized Honda dealer.
5. Check the waist harness latch
• Push the tabs of the waist harness
latch with your fingers and check that
the latch separates into the left and
right parts.
• After separating the waist harness
latch into the left and right parts,
check the latch for cracks, breakage
and other damage.
After check, latch the waist harness
latch until it clicks. Before latching, be
sure to check the surface side and
reverse side of the latch not to twist the
waist harness.
If the latch does not separate, it must be
repaired. If the latch is damaged, it must
be replaced. Consult with your
authorized Honda dealer.
THROTTLE TRIGGER
Push the latch tab fro
WAIST HARNESS LATCH
LATCH TABS
This will unbuckle and release the latch.
LATCH TABS
both sides.
29