Priming Pump - Honda UMR435T Manuel De L'utilisateur

2. To start a cold engine, move the choke lever to the CLOSED position.
To restart warm engine, leave the choke lever in the OPEN position.
NOTE:
Do not use the choke if the engine is warm or the air temperature is high.
CLOSED ········
OPEN ··········
3. Press the priming pump several times until the priming pump is filled with fuel.
Even if the priming pump is pressed too many times, the extra fuel will return to
the fuel tank.
If the priming pump is not pressed enough, the engine may not start.

PRIMING PUMP

CLOSED CLOSED CLOSED
OPEN OPEN OPEN
CHOKE LEVER
35