3. Apply grease to the outer surface of
the inner shaft with your fingers. Be
sure to apply grease to the entire
outer surface evenly from end to
end.
4. Insert the inner shaft into the
flexible shaft assembly to assemble.
5. While turning the inner shaft with
your hand, push it in and check that
the cutting blade turns.
6. While aligning the inner shaft with
the mating part and unlocking the
lock lever, insert the flexible shaft
assembly into the engine side clutch
case. Insert the flexible shaft
assembly until the lock lever clicks.
60
Apply grease to the entire
outer surface of the inner
shaft fro
end to end.
INNER SHAFT
(Insert the inner shaft
while turning it.)
LOCK LEVER
FLEXIBLE SHAFT
ASSEMBLY
INNER SHAFT
FLEXIBLE SHAFT
ASSEMBLY
CLUTCH CASE