Philips 3000 Serie Mode D'emploi page 28

30
English
Problem
White smoke comes out of the
appliance.
The screen on the Airfryer shows
"E1".
The screen on the Airfryer shows
"E4–E12".
Possible cause
You are cooking fatty ingredients.
The pan still contains greasy
residues from previous use.
Breading or coating did not
adhere properly to the food.
Marinade, liquid or meat juices are
splattering in the rendered fat or
grease.
The device is broken / has defects.
Your Airfryer might be stored in a
place where it is too cold.
The device might have a
malfunction.
Solution
Carefully pour off any excess oil or
fat from the pan and then
continue cooking.
White smoke is caused by greasy
residues heating up in the pan.
Always clean the pan and the
basket thoroughly after every use.
Tiny pieces of airborne breading
can cause white smoke. Firmly
press breading or coating to food
to ensure it sticks.
Pat food dry before placing it in
the basket.
Call the Philips service hot line or
contact the Consumer Care Center
in your country.
If your device was stored at a low
ambient temperature, let it warm
up to room temperature for at
least 15 minutes before you plug it
in again.
If your display still shows "E1", call
the Philips service hot line or
contact the Consumer Care Center
in your country.
Try to plug out and plug in the
device. If this does not help please
call the Philips service hot line or
contact the Consumer Care Center
in your country.