Salicru SLC TWIN PRO3/RT3 Mode D'emploi page 352

6.1.2.2. UPS start-up without mains voltage
(Cold Start, via battery).
Before using this feature, the UPS must have been powered
by the mains with the output enabled at least once.
Start-up via battery (Cold Start) can be deactivated. See the user
settings.
Press and hold the on/off button for 1 second, the alarm will
1.
beep once.
Press the on/off button again (1 second) when the UPS system
2.
is running.
The UPS is running in Battery mode.
3.
Fig. 57. Start-up sequence from the battery.
76
6.1.3. UPS shutdown.
Press and hold the on/off button for 3 seconds, the alarm will
1.
beep once.
The UPS enters Standby mode after disconnecting the power
2.
cord.
The UPS initiates shutdown shortly after disconnecting the
3.
power cord.
Fig. 58. Shutdown sequence.
SALICRU