Publicité
Les langues disponibles
Les langues disponibles
Description
Set "No Battery" mode when the UPS works as a stabiliser/
frequency converter without batteries.
LCD display
Configure
Description
When the input voltage is within range but the UPS is
overloaded, the system will automatically switch to Bypass
mode; it is also possible to switch to this mode via the
front panel.
LCD display
Configure
Tab. 21. Operating modes.
USER MANUAL
No battery mode
Bypass mode
7.9. BATTERY TEST.
Manual test.
Press "
" on the display to enter the main menu.
Press "
" on the display to select and enter the "Control"
menu.
Enter the "Control" menu to select and enter "Start battery test".
Fig. 64. Start battery test.
Automatic test.
The automatic battery test (enabled by default) is executed when
the batteries are floating and every 60 seconds.
SLC TWIN PRO3/RT3 4÷10 kVA UNINTERRUPTIBLE POWER SUPPLIES (UPS)
83
Publicité
