Salicru SLC TWIN RT SLC TWIN PRO3 Mode D'emploi page 77

7. CONTROL PANEL WITH LCD
DISPLAY AND MENU TREE.
7.1. LCD SCREEN.
The UPS provides useful information about the UPS itself, the load
status, events, measurements and configuration.
On-Line mode
indicator
(green)
Escape
Fig. 59. LCD screen.
The following table shows the indicator statuses and their
description:
Indicator Status
On
On
On
!
On
Tab. 14. Indicator status.
The following table shows the status of the buttons and their
description:
USER MANUAL
Battery mode Bypass mode
indicator indicator
indicator
(orange) (orange)
Up Down Enter On/off
button
Description
The UPS is operating normally in On-Line or
High Efficiency mode.
The UPS is operating in Battery mode.
The UPS is operating in Bypass mode.
The UPS has an active alarm or fault. See
troubleshooting for more information.
Button
Fault
(red)
Tab. 15. Button status.
Function Illustration
Press the button for > 100 ms and < 1 s
Power On to start the UPS without mains input
but with the battery connected.
With the UPS powered, press the
On
button for >1 s to start it up.
By pressing the button > 3s, the UPS
Shutdown
will turn off.
Go up Press to scroll up the menu.
Restore main Press to restore the automatic display
screen on the main screen.
Go down Press to scroll down the menu.
Lock main Press to lock the LCD home screen on
screen the main screen.
Enter the
Select/Confirm the current selection.
menu
Press to exit the current menu and
Exit the current change to the main menu or the higher
menu level menu without changing the
configuration.
SLC TWIN PRO3/RT3 4÷10 kVA UNINTERRUPTIBLE POWER SUPPLIES (UPS)
77