Salicru SLC TWIN RT SLC TWIN PRO3 Mode D'emploi page 62

5. INSTALLATION.
Read and follow the Safety Information set out in chapter 2
of this document. Failure to adhere to any of the indications
set out in Chapter 2 may cause a serious or very serious accident
for those who are in direct contact with the unit or who are in the
vicinity, as well as faults in the unit and/or in the loads connected
to it.
Unless otherwise indicated, all actions, instructions, guidelines and
notes are applicable to the devices, whether or not they form part
of a parallel system.
5.1. RECEPTION, UNPACKING, CONTENT,
STORAGE, TRANSPORT AND LOCATION.
Pay attention to section 1.2.1. of the safety instructions
-EK266*08- in all matters relating to the handling, moving and
positioning of the unit.
Use the most suitable means for moving the UPS when it is still
packed, with a pallet truck or forklift.
Any handling of the unit must be done paying attention to
the weights indicated in Chapter "9. GENERAL TECHNICAL
SPECIFICATIONS." according to the model.
5.1.1. Reception.
Check that:
The information on the label attached to the packaging
•
corresponds to the information specified in the order. Once
the UPS is unpacked, check the above information with the
information on the unit's name plate.
If there are any discrepancies, deal with the non-conformity as
soon as possible, citing the unit's manufacturing number and
the references on the delivery note.
It has not suffered any mishap during transport.
•
Otherwise, follow the protocol indicated on the label attached
to the packaging.
5.1.2. Unpacking.
The packaging of the device consists of a cardboard box, expanded
polystyrene (EPS) or polyethylene foam (EPE) corners, polyethylene
cover and strips, all of which are recyclable materials; so if you do
dispose of them, you should do so in accordance with current laws.
We recommend keeping the packaging in case it needs to be used
in the future.
In the case of SLC TWIN PRO3
•
marked in the EL24050 Unpacking Guide.
In the case of
•
marked in the Unpacking Guide EL25550.
Do not leave the plastic bag within the reach of children
•
to avoid danger of suffocation.
62
units, follow the procedure
SLC TWIN RT3 units, follow the procedure
Inspect the device before proceeding and, in the event of
•
finding damage, contact the supplier or, failing that, our firm.
5.1.3. UPS content.
5.1.3.1. SLC TWIN PRO3, 4, 5, 6, 8 and 10 kVA
standard models.
Check that the packaging contains the following elements:
1
3
5
7
Fig. 17. UPS packaging content.
Item Description
1 UPS
2 Supports to improve stability
3 Quick unpacking guide
4 Warranty leaflet
5 QR guide
6 USB cable
7 Cable gland kit included only for UK versions
Tab. 4. UPS packing list.
2
4
6
Quantity
1
4
1
1
1
1
1
SALICRU