Publicité
Les langues disponibles
Les langues disponibles
Mount the tower supports, and then fit the UPS onto them.
4.
Fig. 29. Assembly of the supports.
Fig. 30. Fit the UPS onto the supports.
Installation of a unit and its battery module in a tower-type
assembly.
Mount the extension plate as shown below and fit the UPS
1.
and battery.
Fig. 31. Assembly of the extension plate.
USER MANUAL
Fig. 32. Installation of the UPS + battery module on the supports.
Assembly of the PDU with the TWIN RT3 UPS.
Fig. 33. Installation of the PDU.
Remove the screws from the two supports on both ends of
1.
the PDU.
Fig. 34. Installation of the supports.
Attach the L-brackets to the back of the PDU with the supplied
2.
screws.
Fig. 35. Fixing the PDU on top of the UPS.
Install the PDU on top of the UPS with the supplied screws.
3.
SLC TWIN PRO3/RT3 4÷10 kVA UNINTERRUPTIBLE POWER SUPPLIES (UPS)
67
Publicité
