Aosom 370-149V80 Instructions De Montage page 18

HINT: The follow steps only for the type with roof.
2
1. Fit the roof assembly to the vehicle body.
2. Insert a Ø4x12 flat head screw through the roof front support and into the bonnet,
and tighten with a screwdriver. repeat for the other side.
3. Insert two Ø4x12 flat head screws through
the rear rollbar support and into the vehicle
body. and tighten with a screwdriver. repeat
for the other side.
Type with roof completed.
Attach the Roof(2) │ 14
1
3