HINT: If the steering wheel of your vehicle equipped with the sound function, please
follow the steps 1-4 to add the batteries (Not Included), and refer to the battery
information on page 2.
1. With a screwdriver remove the
screw on the battery cover located
in the center of the steering wheel.
2. Remove the battery cover from the
top of the battery compartment.
3. Insert 2x1.5 AA batteries in their
correct polarities.
4. Place the battery cover over the
battery compartment and fasten
with the screw you removed in step
one.
Attach the Steering Wheel
Remove the M5x35 machine screw and Ø5 nut from the steering wheel.
Turn the vehicle body upright.
5. Place the steering wheel over the the steering column, protruding from the middle of
the steering wheel base.
6. Align the holes on each side of steering
wheel with the holes at the end
of the steering column.
7. Fasten a nut on the opposite
end of the screw to secure the
steering wheel to the steering
column.
Attach the Steering Wheel │ 9
7
End of steering column
3
2
4
6
1