Aosom 370-149V80 Instructions De Montage page 17

HINT: The follow steps only for the type with roof.
"R" marked
"R" marked
HINT: The roof, roof beams, roof front supports and roof
rear supports are marked "L" and "R", aslo they are
designed to assemble together in only one way. Please
follow the guides: L to L (L1 to L1, L2 to L2), R to R (R1 to R1, R2 to R2)
1. Using a screwdriver to remove the M5x25 machine screws and Ø5 nuts from the left and right
roof beams.
2. Fit the both roof beams to the roof.
3. Insert three Ø4x12 flat head screws and tighten on each beam.
4-5. Fit the rear rollbar support to the roof beam, secure with M5x35 machines *2 and Ø5 nut *2
you removed in step one. Repeat for the other side. (L2 to L2, R2 to R2)
6-7. Fit the front rollbar support to the beam, secure with M5x35 machines *2 and Ø5 nut *2 you
removed in step one. Repeat for the other side. (L1 to L1, R1 to R1)
Attach the Roof(1) │ 13
3
"L" marked
5
2 2
1 1
"L" marked
6
4
7