Publicité
Les langues disponibles
Les langues disponibles
Attach the Shift Level Assembly & Protecting Board │ 10
1. Lift up the shift lever assembly and remove the four Ø4x12 round head screws
with a screwdriver.
2. Push the Shift Lever Assembly forward and locate it over the 4 screws mounting
brackets as shown.
3. Secure it by tightening the four removed screws.
4. Fit the protecting board to the vehicle body.
5. Tighten securely with two Ø4x12 flat head screws with a screwdriver.
1
5
4
2
3
Publicité
