CAME OPS Serie Manuel D'installation, D'utilisation Et D'entretien page 37

FASTENING THE GEARMOTOR
Complete the adjusting, fasten the gearmotor to the plate using the washers and nuts.
ESTABLISHING THE LIMIT-SWITCH POINTS
For opening:
- completely open the gate;
- fit the opening endstop fin onto the rack until the micro switch activates (spring);
- fasten it using the allen screws
For closing:
- completely close the gate;
- fit the closing endstop fin onto the rack until the micro-switch activates (spring);
- fasten it using the allen screws
⚠ Don't let the gate get to the mechanical stop, whether it is the opening or closing one.
2
1
2
Spring
1