Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE!
The function to change the channels by pressing the CH-button can be
used only if more than one remote sensor is connected with the main
unit. Otherwise this function is disabled.
Automatic time setting
1. After the batteries are installed. The clock will automatically search for
the radio signal. It takes about 3-5 minutes to finish this process.
2. If the radio signal is received, the date and time will be set automatical-
ly and the radio control signal icon
If the clock fails to receive the time signal, go ahead with the following
steps:
1. Press UP and DOWN button at the same time for approx. 3 seconds to
initialize radio signal reception manually.
2. If the time signal receiving fails again, the time can be set manually.
Manual time setting and user-defined settings
1. In normal display mode, press and hold the MODE button for approx 2
seconds to enter settings mode. '24Hr' will flash.
2. Press the UP or DOWN button to change the value.
3. Press the MODE button to confirm and go to the next value to be
changed.
28
turns on.
4. The setting order is 24/12 hour mode >> °C/°F >> hPa/inHg >> time
zone (-2 to +2 hours) >> hours >> minutes >> year >> month >> date >>
language (GE = german / EN = english / IT = italian / FR = french / SP =
spanisch) >> save and exit.
5. If there is no operation for 20 seconds, the existing setting will be
saved and the device returns to normal display mode. You can also press
the MODE button again to confirm and exit.
NOTE!
Independent from the time setting method we recommend to select the
city next to you manually (see "Set city").
SET CITY
Manually set the city next to you as follows to ensure that the moon phas-
es, tides and sunset and sunrise are displayed correctly.
1. Press the CITY button.
2. Press the UP or DOWN button to set the desired city (see table 'Cities'
for an explanation of the city tokens)
3. Press the CITY button again.
ALARM SETTING
1. Press the MODE button once or several times to display one of the
two alternative wake up times. Once a mode is selected hold the MODE
button for 2 seconds to get into alarm setting mode.
Publicité
Table des Matières
