Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
C
MODE button
Switch between time and alarm mode. Press and hold for 2 seconds
when in the appropriate mode to enter setting mode for time and date as
well as changing the alarm time.
D
UP button
Display MIN/MAX values for temperature and humidity. In settings mode:
Setting a value.
E
DOWN button
Enable/Disable temperature and/or frost warning. In settings mode: Set-
ting a value.
F
CHANNEL button
Press 'channel' repeatedly to successively display the information of the
different remote sensors (optional: up to 3 outdoor sensors can be con-
nected). Press and hold for 2 seconds to initialize transmission of the RC
signal from the remote sensor.
Note:
The function for changing the display is only activated when at least two
remote sensors are connected.
G
HISTORY button
Display barometric pressure values of the last 12 hours. Press and hold
for 2 seconds to enter settings mode for the barometric pressure unit
(Abs = absolute / Rel = relative).
H
CITY button
Press to enter settings mode for city selection.
I
SNOOZE/LIGHT button
Press to interrupt an alarm or press to enable background lightning for
5 seconds.
J
Wall-mount recessed hole
This hole makes it possible to mount the main unit on a wall.
1)
Battery compartment
1!
Table stand
Foldable. Use this stand to place the device on a flat surface.
EN
23
Publicité
Table des Matières
