Publicité
❏ Centre mode and parameters must be set using Switch-It® Vigo
Drive:
❏ Please make sure to check if the center mode is set to
"Countdown" in Switch-It® Vigo Drive. If yes, the
"Timeout" has to be set.
❏ The maximum speed, acceleration, deceleration of the head
drive profile of the wheelchair controller must be adjusted:
❏ Settings of the controller must be administered by
specifically trained and authorized personnel.
❏ Acceleration and deceleration settings of the wheelchair
shall not cause inertia on the user's head that the user
cannot compensate for.
❏ Maximum speed must always be in accordance with the
local regulations.
❏ The service network must be used only for the time when
changes are made to the personal drive profile.
96
Publicité
