Publicité
Link Wiring to PGDT
The Link provides a proportional analog signal compatible with the
PGDT Omni (and some other controller systems – see in System
Requirements). The interface is a standard D-type connector, fitted with
"detect link" and "fifth switch" functions. As there is no internal power
source or auxiliary power input connector on the Link the power for
operation is provided by the Omni.
If the Omni is configured with the programmable parameter "Sleep 12V"
to cut the power on SID connectors when turned off, Link is going to be
turned off as well. The Link doesn't require a permanent power supply.
For power saving reasons "Sleep 12V" parameter is advised to be set in
the R-Net system.
45
Publicité
