Publicité
Programming the Omni
For programming the Omni please follow the instructions provided by
Penny and Giles Drive Technologies. There are three methods of
programming the Omni. Details of the actual programmable parameters
are given in the SK78813 Programming chapter. Ensure the R-Net
Control System's Drive, Acceleration and Deceleration settings are at a
comfortable and safe level prior to attempting to program the Omni to
suit the user.
Refer to the R-Net Technical Manual SK77981 or the On-Board
Programming Manual SK78571 for details of how to program the R-Net
Control System. Programming should only be conducted by
professionals with in-depth knowledge of PG Drives Technology
electronic control systems. Incorrect programming could result in an
unsafe set-up. NowTechnologies Ltd. accepts no liability for losses of
any kind if these conditions are not met.
60
Publicité
