Publicité
6. Ask the user to push the Headrest Sensor, and when he/she
starts hearing the sounds, push it again before the sounds are
over. This will activate the Drive mode and Deactivate again to
finish the calibration process. At the end of the process, the Link
will be in an inactive state.
For other status displays, please see the Cubo System Status
Feedback section in the Appendix.
WARNING
your directions accurately, stop driving and recalibrate the
system. Follow the directions above and put the Vigo on a
stable and flat surface after step 5 until the calibration icon
changes to a checkmark (usually 5-10 seconds).
If you ever experience that the chair is not following
75
Publicité
