Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Locking the Control Panel
Use the following procedure to lock control panel buttons.
1. Press and hold both
control panel.
• The LED on the
control panel is locked.
2. To unlock, press and hold both
to unlock the control panel.
• The unit can also be unlocked by pressing the
When the unit is turned back on it will no longer be in lock
mode.
Resetting the Software
Use the following procedure if the induction well is unresponsive
and the control display(s) appears "frozen."
1. Press the
button to turn off the unit.
2. Press and hold the
panel for at least 3 seconds.
• The unit will reset and restart.
and
for 3 seconds to lock the
button will flash to indicate the
and
for 3 seconds
and
buttons on the control
Updating Firmware
Use the following procedure to upload firmware updates to the
Induction Dry Well from an external USB drive.
NOTE: For the latest firmware updates, go to the Hatco website:
www.hatcocorp.com. Click on the "Resources" drop
down menu and select "Firmware Download".
1. Turn off the unit by pressing the
2. Insert the USB drive into the USB port.
• The USB port is on the front of the control panel.
button.
• A screen will appear to indicate the update is in progress.
• When the update is complete, the display will show "DONE".
• Removing the USB drive from the USB port will restart
the unit.
NOTE: If an error message appears indicating that the update
has failed, perform the "Updating Firmware" procedure
again using a new USB drive.
Checking the Firmware Version
Use the following procedure to check the the User Interface (UI)
or the inverter (CB) firmware version.
1. Press and hold the
panel to enter the firmware version menu.
2. Press
or
CB" (Inverter) firmware versions.
3. Press
to select and show the "VER UI" or "VER CB"
firmware version.
4. Press
button to return to the previous screen.
12
English
button.
and
buttons on the control
to toggle between "VER UI" (UI) or "VER
IWELNM-0424
Publicité
