Publicité
Les langues disponibles
Les langues disponibles
such as safety photocell photoelec-
tric curtains, protective panels, inter-
locked doors, protective casing.
• All the zones within the control units,
electrical cabinets and junction boxes.
• All the zones around the appliance
in operation when the minimum safe-
ty distances are not being respected.
EQUIPMENT REQUIRED
FOR INSTALLATION /
The authorised technical operator, in
order to perform the installation ope-
rations correctly, must respect the
following requirements: - 3 and 8 mm
screwdriver / - Adjustable pipe wren-
ch /- Gas use tools (hoses, gaskets
etc.) / - Electrician's scissors / - Wa-
ter use tools (hosesetc.) / - 8 mm hex
socket wrench / - Gas leak detector
- Tools for electric use (cables, termi-
nal blocks, industrial sockets etc.)
- 8 mm nut driver / - Complete instal-
lation set (ele etc.)
In addition to the tools listed, an
equipment lifting device is re-
quired. This equipment must
comply with all the regulations rela-
ting to lifting equipment.
INDICATION
ON
RISK / Even though the rules for
"good manufacturing practice" and
the provisions of law which regulate
manufacturing and marketing of the
product have been implemented, "re-
sidual risks" still remain which, due to
the very nature of the appliance, it has
not been possible to eliminate. These
risks include:
RESIDUAL
ELECTROMAGNETIC INTER-
FERENCE / The equipment
use can damage the correct working
of cardiac stimulator (pacemaker).
RESIDUAL RISK OF DAN-
GER TO MAGNETIC COMPO-
NENTS / This risk subsists in
case of objects equipped with magne-
tic components (mobile phone, credit
cards etc.) which are placed near the
working equipment. They could suffer
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
RESIDUAL
DANGER
OF
- 7 -
alterations and be damaged.
RESIDUAL RISK OF SHOR-
TCIRCUIT / This risk exists in
case are in direct contact two or
more pots during cooking. Danger of
overheating and possible welding
between the parts.
RESIDUAL
ELECTROCUTION / This risks
remains when intervening on
live electrical and/or electronic devices.
RESIDUAL RISK OF BUR-
NING /
This risks remains
when unintentionally coming
into contact with materials at high tem-
peratures.
RESIDUAL RISK OF BURNS
DUE TO LEAKING OF MATE-
RIAL / This risks remains when
unintentionally coming into contact
with materials at high temperatures.
Containers that are too full of liquids or
solids that during warming change
morphology (changing from a solid to
a liquid), can, if used incorrectly, cau-
se burns. During operations, the con-
tainers used must be placed on easily
visible levels.
RESIDUAL RISK OF CRU-
SHING LIMBS / This risk exists
where there is accidental con-
tact between the parts during positio-
ning, transportation, storage and as-
sembly.
RESIDUAL RISK OF EXPLO-
SIONS / This risk remains
when:
• there is smell of gas in the room;
• appliance used in an atmosphe-
re containing substances which risk
exploding;
• using food in closed containers (such
as jars and cans), if they are not sui-
table for the purpose.
RESIDUAL RISK OF FIRE /
This risk exists by flammable li-
quids / material flammable
NEW! REMOVABLE BOTTOM /
vd. SECT. ILL - REF. f)
2.
EN
RISK
OF
Publicité
