Publicité
Les langues disponibles
Les langues disponibles
Al EDIT RECORDING
u,-
REC
FUNCTION
t
ca..ettede.kM
I(
JI
0-9,+10
SHIFT
REC/
REC MUTE
The Al edit function enables CD recording without worrying about
tape length and track length, When a CD is inserted, the unit
automatically calculates track lengths. If necessary, the order of
tracks is rearranged so that no track is cut short.
(Al: Artificial Intelligence)
m
Al edit recording will not start from a point halfway into the tape.
The tape must be recorded from the beginning of either side.
1
2
3
Load the tape into the cassette deck.
Load the tape with the side to be recorded on first facing
upward.
Press the CD button on the remote control, or
press repeatedly the FUNCTION button on the CD/
tape unit so that "CD" is displayed,
and load the
disc.
Press
the CD EDIT
button
repeatedly
while
pressing the SHIFT button on the remote control
until "EDIT"
lights up and "Al" flashes
on the
display.
4
5
Press the numbered buttons to designate the tape
length.
10 to
99
minutes can be specified.
Example: When using a 60-minute tape, press the 6 and O
buttons.
In a few seconds, the microcomputer determines the tracks
to be recorded on each side of the tape.
The +
and -
buttons are also available to designate
the tape length.
Press the
REC button on the CD/tape unit to
start recording.
To start recording with the remote control, press the
REC/
REC MUTE button and within 2 seconds, press the P button.
The tape is rewound to the beginning of the side facing upward,
the lead segment is played through for 10 seconds, and
recording starts. When recording on the side facing upward
(side A) ends, recording on the opposite side (side B) starts.
To stop recording
Press the
button. Recording and CD play stop simultaneously.
To
clear the edit program
Press the
button twice so that "EDIT disappears on the display.
To check the order of the programmed
track numbers
Before recording, press the CD EDIT button while pressing the
SHIFT button on the remote control to select side A or B, and
press the -
button repeatedly.
Tape side
Program number
Track number
Programmed track
numbers
Time on cassette tapes and editing time
The actual cassette recording time is usually a little Ionaer than
the specified recording time printed on the 'label. This-system
can program tracks to use the extra time.
Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
The Al edit function cannot be used with discs containing 31
tracks or more.
16
ENGL/SH
Publicité
