Aiwa XR-M88 Mode D'emploi page 14

DISPLAY
E
aaca
aaoo
00
caacaca
00
",,"u,,,gaa 000
..— .- ...",..,———. —
' 000000
—
StilFT
To change the display in playback mode
Press the DISPLAY button while pressing the SHIFT button on
the remote control.
Each press on the button changes the display in the following
order:
1?
@ Level indicator
@ Tape counter
(Example: TAPE 01 85)
About cassette tapes
To prevent accidental erasure, break off the plastic tabs on
the cassette tape after recording with a screwdriver or other
pointed tool.
Side A
Tab for side A
/
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover
the Type
II
tape detection slot.)
120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
/
14
ENGLISH