Publicité
Les langues disponibles
Les langues disponibles
PRESETTING STATIONS
PRESET NUMBER TUNING
I
1
1-1-
1
C) L AUQ2
0 00
t
M
L..
. . ..–
&
I.-J
The system can store a total of 32 preset stations. (Each band
has a maximum of 20 available preset stations.) When a station
is stored, a preset number isassigned
to the station.
Use the
preset number to tune into a preset station directly.
1
2
3
Press the TUNER/BAND
button on the remote
control (or the FUNCTION
button on the CD/tape
unit) to select a band.
Then, press the +
or
> button to select a station.
Press the 11 button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Preset number
Frequency
Repeat steps 1 and 2.
The next station will not be stored if 32 preset stations have
already been stored ("FULL' will be displayed).
1 Press the TUNER/BAND
button
on the remote
control or the FUNCTION
button on the CD/tape
unit to select a band.
2 Press the +-
button on the CD/tape unit or the
E button on the remote control.
Each time the button is pressed, the next ascending preset
number is selected.
Tuning by preset number
1 Press the TUNER/BAND button on the remote control to select
a band. (Or use the FUNCTION button on the CD/tape unit.)
2 Press the numbered buttons on the remote control to select a
preset number:
Example:
To select preset number 10, press the +10 and O buttons.
To select preset number 15, press the +10 and 5 buttons.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the
button, and press the II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
m
If there is a long period of power failure or disconnection of AC
cord, the presetting of the stations is canceled. In this case, preset
again.
I
o
ENGLISH
Publicité
